Job Categories
| Returned: 3585 results. | |
| Manufacturing Engineer CyberCoders Lorain Manufacturing Engineer Title: Manufacturing Engineer Location: Lorain, OH Salary: $80k-$100k (DOE) with full benefits About Us: We are a manufacturing company that specializes in high-quality, custom-engineered solutions for various different industries. We mainly focus on automotive products such as seating. Due to growth and demand for our services, we are looking for a manufacturing engineer to join the team. What you will be doing: Utilize lean manufacturing principles and Six Sigma methodologies to identify opportunities for process optimization and waste reduction. Develop and program PLC systems to automate manufacturing processes. Leverage AutoCAD to create and modify drawings for manufacturing components. You should know or have most of the following: Lean Six Sigma AutoCAD Experience in a fast-paced manufacturing environment Continuous Improvement PLC Programming Benefits- Competitive base salary and overall compensation package - Full benefits: Medical, Dental, Vision - 401 (K) with generous company match - Generous Paid time off (PTO) - Vacation, sick, and paid holidays - Life Insurance coverage - Applicants must be authorized to work in the U.S. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable law. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please contact a member of our Human Resources team to make arrangements. 2024-04-23T08:35:08Z | |
| Manufacturing Engineer Eaton Corporation Euclid Eaton's AER FMC Fuel Motion Control Systems division is currently seeking a Manufacturing Engineer. This role is based at our Euclid, OH facility. Manufacturing engine fuel pumps for both military and commercial aircraft, our Euclid facility has approximately 330 employees.Manufacturing engine fuel pumps for both military and commercial aircraft, our Euclid facility has approximately 330 employees. ? The expected annual salary range for this role is $65250.0 - $95700.0 a year. This position is also eligible for a variable incentive program. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. The Manufacturing Engineer leads Manufacturing Engineering for the assigned High-Performance Work Team and will focus on execution and implementation of best assembly and test practices, including process troubleshooting and improvement, new product introduction, and advancements in assembly technologies. Executes strategic vision related to assigned functional responsibilities to include: cost out / overhead optimization, CONC/DPPM reduction, leads lean continuous improvement activities related to productivity, and waste reduction improvements. Interface as necessary with internal Customers, Supply Chain, Engineering, ELSS and other disciplines to assure safety, quality, and cost control. What you'll do: - Develop, prepare, and maintain complete cost-efficient manufacturing processes for product hardware of above average complexity. Design and implement routers, operational process sketches, fixturing and gages for safe and efficient manufacturing, assembly, inspection and testing of aerospace hardware. - Determine all tooling, gauging, programing, and equipment requirements. - Optimize existing assembly and test utilization through upgraded and improved tooling, programming, and first pass yield. - Provide support to floor issues focused on assembly, bearing, and test. Additionally, will assist as needed to other manufacturing areas. - Develop and implement acceptance criteria, procedure/work instructions, setup instructions, quality management alerts regarding assembly capabilities and training materials in accordance with internal/external requirements. - Maintenance of production routings and time standards related to changes in process or equipment in assembly, bearing, or test. - Assist Quality with root cause and corrective actions to resolve issues involving discrepant product or material and support efforts to create more consistent quality manufacturing. - Participate in the procurement and start-up of new capital equipment (including payback and net present value analysis) for acquisition of equipment to support emerging and existing technologies as required. - Lead 3D printing effort for creating fixtures and tooling to aid production. Support the usage of CMM inspection. - Interact with Design Engineering, Operations and Supply Chain teams to ensure design for manufacturability of new products. Participates in design review process or quoting process of new orders and acts as a liaison for products from inception through shipment to customer. - Support the planning, procurement, and maintenance of specialized tooling for all equipment to ensure constant availability to manufacturing as well as continuously improve the manufacturing process through upgrades and improvements to current tooling supply and sourcing. - Promote culture of Continuous Improvement and understand lean manufacturing techniques as they apply to eliminate waste and deliver products to customer's expectations. Drive short-term and long-term improvements to achieve goals outlined on Value Stream Maps. Participate in kaizen events, i.e., set-up reduction, Standard Work, 5S, and problem-solving activities. Qualifications: Required (Basic) Qualifications: - Bachelor's degree in engineering or engineering technology from an accredited institution and minimum one (1) year engineering experience in a machining environment OR in lieu of a bachelor's degree, five (5) years of experience in a manufacturing environment operating and programing machines with a minimum of two (2) years' experience supporting manufacturing operations. - Proficient in use of Microsoft Office Products - Experienced in utilizing 2D/3D CAD software. - No relocation benefit is being offered for this position. Only candidates that currently reside within 50 miles of the Euclid, OH facility will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation. - This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. - Must be authorized to work in the United States without company sponsorship now or in the future. Preferred Qualifications: - Minimum of five (5) years of engineering experience in a manufacturing environment, minimum of two (2) years related to assembly. - Two (2) years of experience leading manufacturing in a union manufacturing environment - Design, operations, or manufacturing engineering experience. - Sound manufacturing background (Processing, Programming, Assembly, and Tooling) - Excellent working knowledge of SPC and Six-Sigma principles - Experience in the use of Catia, Microsoft Word, Excel, PowerPoint, and familiarity with G&M Code. LI-EJW Skills: We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (https://www.eaton.com/content/dam/eaton/company/careers/US%20Benefits%20updated%2010.24.22.pdf) for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. 2024-04-05T15:09:08Z | |
| Manufacturing Engineer Crane Aerospace & Electronics Elyria Manufacturing Engineer Location OH, Elyria Department Engineering Employment Type Full Time Crane Aerospace & Electronics a unique and exciting career opportunity for a Manufacturing Engineer to join our team in Elyria, OH . Position Summary: The Manufacturing Engineer performs complex and varied work to develop and recommend improvements in the Manufacturing system and in product manufacturability and cost effectiveness. Responsibilities: - Mentor's the team and more junior ME's, providing training and coaching whenever possible. - Lead interdisciplinary teams on assigned projects. - Study, analyze and design methods, procedures, processes, layouts, flow, fixtures and tooling as needed to support production. - Investigate, recommend, and implement manufacturing cost reduction and product improvement programs. - Identify root cause and corrective actions for manufacturing problem. - Participate in customer specification and statement of work reviews. - Participate in the review and evaluation of new product designs or design changes. - Review and analyze design change request initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and verify justification for change. - Evaluate, test and select facilities, equipment and materials required for production in conjunction with production supervision, purchasing and other groups. - Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions. - Develop manufacturing operating instructions. - Develop and track manufacturing metrics to monitor the health of processes. - Evaluate non-conformances as part of the Material Review Board - Direct work activities of production operators to aid in problem solving. - Develop procedures and train assemblers and operators in machine operations, processes or assembly applications. - Coordinate with vendors and customers - Ability to identify and prioritize work with limited input from manager. - Able to develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements. - Any other task assigned by your supervisor or management. Non-Essential Functions: - Champion in a CBS tool set Minimum Requirements: - Experience : 5 years of experience in the field or in a related area. - Knowledge : Practical application of the theories of modern production principles and methods as applied to a high technology design and manufacturing operation; Knowledge of materialcharacteristics and processing, chemicals, basic concepts of electrical systems, mechanical systems, fluids, and heat transfer - Skills/Abilities : CNC programming experience (mastercam/unigraphics, NX, g-code, Creo, etc.) required. New product introduction experience highly desired. - Education / Certification : BS required. Preferred in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Material science, or related field. - Eligibility Requirement : This position may require access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). Preferred Qualifications: - Experience in a regulated manufacturing environment About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Some of our amazing benefits include 401k match, education reimbursement, and 12 paid holidays per year. You can see a list of our benefits ator visit our website at for more information on our company and great opportunities In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity, disability, pregnancy, medical condition, genetic information, protected veteran status or any other characteristic protected under federal, state, or applicable local law. LI-CK1 CAE 2024-02-24T14:59:35Z | |
| Manufacturing Engineer Crane Co. Elyria Crane Aerospace & Electronics a unique and exciting career opportunity for a Manufacturing Engineer to join our team in Elyria, OH. Position Summary: The Manufacturing Engineer performs complex and varied work to develop and recommend improvements in the Manufacturing system and in product manufacturability and cost effectiveness. Responsibilities: Mentor's the team and more junior ME's, providing training and coaching whenever possible. Lead interdisciplinary teams on assigned projects. Study, analyze and design methods, procedures, processes, layouts, flow, fixtures and tooling as needed to support production. Investigate, recommend, and implement manufacturing cost reduction and product improvement programs. Identify root cause and corrective actions for manufacturing problem. Participate in customer specification and statement of work reviews. Participate in the review and evaluation of new product designs or design changes. Review and analyze design change request initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and verify justification for change. Evaluate, test and select facilities, equipment and materials required for production in conjunction with production supervision, purchasing and other groups. Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions. Develop manufacturing operating instructions. Develop and track manufacturing metrics to monitor the health of processes. Evaluate non-conformances as part of the Material Review Board Direct work activities of production operators to aid in problem solving. Develop procedures and train assemblers and operators in machine operations, processes or assembly applications. Coordinate with vendors and customers Ability to identify and prioritize work with limited input from manager. Able to develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements. Any other task assigned by your supervisor or management. Non-Essential Functions: Champion in a CBS tool set Minimum Requirements: Experience: 5 years of experience in the field or in a related area. Knowledge: Practical application of the theories of modern production principles and methods as applied to a high technology design and manufacturing operation; Knowledge of material characteristics and processing, chemicals, basic concepts of electrical systems, mechanical systems, fluids, and heat transfer Skills/Abilities: CNC programming experience (mastercam/unigraphics, NX, g-code, Creo, etc.) required. New product introduction experience highly desired. Education/Certification: BS required. Preferred in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Material science, or related field. Eligibility Requirement: This position may require access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). Preferred Qualifications: Experience in a regulated manufacturing environment About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. Crane Aerospace & Electronics offers competitive salaries and outstanding opportunities for career growth and development. Some of our amazing benefits include 401k match, education reimbursement, and 12 paid holidays per year. You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and great opportunities In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity, disability, pregnancy, medical condition, genetic information, protected veteran status or any other characteristic protected under federal, state, or applicable local law. LI-CK1 CAE 2024-02-27T09:57:42Z | |
| Manufacturing Engineer Camaco, LLC Lorain The Manufacturing Engineer develops and implements optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. Recommends and implements improvements to production processes, methods and controls. Responsible for Engineering Changes. Coordinates manufacturing launch for new and revised products. Essential Duties and Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Conduct time and method studies establishing time standards for manufacturing operations. Provide Industrial Engineering support to all manufacturing operations through the application of lean manufacturing / Kaizen principles. Responsible for Engineering Changes. Develop plant layouts, work instructions, process flow layout, set-up procedures while adhering to safety, quality and productivity procedures and policies. Handle automation with robotic materials and parts. Develop and management of process FMEA’s and other process documentation. Troubleshooting of processes and equipment. Develop, monitor and report production measurables and productivity incentive plans. Refurbishing and repurposing of equipment. Develop, monitor and report production measurables and productivity incentive plans. Support and trouble shoot 8D / Problem resolution methods. Responsible for IATF16949 documentation requirements. Perform other duties as assigned. Qualifications Required Education & Experience Bachelor’s Degree in Manufacturing Engineering, a related field, or equivalent education and experience. 3 plus years of work experience in an automotive manufacturing environment. Competencies Technical Capacity Thoroughness Collaboration Cost Estimation Computer Proficiency (MS Office including Word, Excel, PowerPoint, and Outlook) Advanced knowledge of safety requirements Allen Bradley PLC programming and trouble shooting AutoCad experience, blueprint reading and GD&T Knowledge of Six Sigma Concepts ERP experience, thorough understanding of setting up processes and BOM’s Familiarity with automotive specifications Ability to communicate with all levels of personnel including customers & suppliers Confidentiality Supervisory Responsibility This position has no supervisory responsibilities. Work Environment While performing the duties of this job, the employee regularly works in an office setting and on the plant floor. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to walk, stand, kneel, crouch, talk and hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and depth perception. 2024-03-06T13:22:19Z | |
| Manufacturing Engineer Actalent Newburgh Heights Description: - Lead the implementation into manufacturing of all new, changed, or improved products - Develop, evaluate, improve, and document manufacturing processes - Work closely with quality and manufacturing to implement measurement and process control techniques - Design and develop tooling and processes to ensure effective and efficient production methods - Develop sources for and collaborate with vendors to develop specifications for tooling, equipment, parts, or materials - Assist operations on estimating staffing requirements, production times, and relative costs to provide data - Design and develop a structured process for improvement and coordinate product/process changes (ECR / PCR process) - Design, develop and implement fixtures and tooling that are consistent with low defect levels and low product cost - Create and maintain accurate documentation of tool drawings and equipment design concepts, with R&D and quality assurance functions. - Provide engineering support to production department to trouble shoot and resolve technical problems Skills: Manufacturing engineering, solidworks, Process improvement, manufacturing process, tooling, machining, fabrication Top Skills Details: Manufacturing engineering,solidworks Additional Skills & Qualifications: - Bachelor's degree in Mechanical / Industrial Engineering If no degree , should have 10 years of manufacturing engineering experience - 5 years plus of Manufacturing Engineering experience with tooling, machining or fabricating processes - Experience using Solidworks, Creo, or Pro-E - Ability to read technical drawings / blueprints - Previous experience with work cells, work instructions or ordering parts Nice to haves: - Prior experience with compression/transfer molding and industrial paint - Prior experience with CNC programming (HAAS, Mazak) - Prior experience with robotics (FANUC, UR, Doosan) - Experience with a statistical software package such as SQC Pack or Mini Tab This individual should be a self starter and motivated About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: - Hiring diverse talent - Maintaining an inclusive environment through persistent self-reflection - Building a culture of care, engagement, and recognition with clear outcomes - Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodationactalentservices.com (%20actalentaccommodationactalentservices.com) for other accommodation options. 2024-04-13T15:16:46Z | |
| Manufacturing Engineer Actalent Bratenahl Description: Lead the implementation into manufacturing of all new, changed, or improved products Develop, evaluate, improve, and document manufacturing processes Work closely with quality and manufacturing to implement measurement and process control techniques Design and develop tooling and processes to ensure effective and efficient production methods Develop sources for and collaborate with vendors to develop specifications for tooling, equipment, parts, or materials Assist operations on estimating staffing requirements, production times, and relative costs to provide data Design and develop a structured process for improvement and coordinate product/process changes (ECR / PCR process) Design, develop and implement fixtures and tooling that are consistent with low defect levels and low product cost Create and maintain accurate documentation of tool drawings and equipment design concepts, with R&D and quality assurance functions. Provide engineering support to production department to trouble shoot and resolve technical problems Skills: Manufacturing engineering, solidworks, Process improvement, manufacturing process, tooling, machining, fabrication Top Skills Details: Manufacturing engineering,solidworks Additional Skills & Qualifications: Bachelor's degree in Mechanical / Industrial Engineering If no degree , should have 10 years of manufacturing engineering experience 5 years plus of Manufacturing Engineering experience with tooling, machining or fabricating processes Experience using Solidworks, Creo, or Pro-E Ability to read technical drawings / blueprints Previous experience with work cells, work instructions or ordering parts Nice to haves: Prior experience with compression/transfer molding and industrial paint Prior experience with CNC programming (HAAS, Mazak) Prior experience with robotics (FANUC, UR, Doosan) Experience with a statistical software package such as SQC Pack or Mini Tab This individual should be a self starter and motivated About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: Hiring diverse talent Maintaining an inclusive environment through persistent self-reflection Building a culture of care, engagement, and recognition with clear outcomes Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodationactalentservices.com for other accommodation options. 2024-04-16T06:25:54Z | |
| Manufacturing Engineer American Tank & Fabricating Co. Newburgh Heights Manufacturing Engineer | Cleveland, OH Want to build large complex fabrications for submarines? That's one of the important things we do here at AT&F. If so, learn more about our team, how we work together, and the amazing fabrications we build at www.atfco.com/draftday You are part of the AT&F Family starting on the first day. Medical benefits start on your first day. Who Are We? We Build, Protect, Energize, and Move the World through Metal Fabrication Founded in 1940, AT&F is a major producer of components for construction cranes, mining equipment, defense projects, structural sections for shipbuilding, power industry related components, and specialty stainless steel fabrications. AT&F is comprised of specialized Business Units (BUs): Heavy Fabricating, Precision Processing, AT&F Advanced Metals, and AT&F Wisconsin. Our multiple facilities have over 600,000 square feet of manufacturing space and over 200 Team Members. AT&F is in its fourth generation of family leadership. While the values of the organization are like those found in family-run firms, AT&F is also forward thinking, sophisticated, and professional. Who We Want on Our Team? We offer competitive salaries and a full range of benefits for our Team Members, including health, dental, vision, life insurance, 401(k), tuition reimbursement, paid time off, holidays, AT&F clothing program, a Wellness Program, Military Veterans Resource Group, ESL Classes, and opportunity for career growth. However, our Team is motivated by more . Teamwork, Purposeful Work, and Getting Better at our Craft. Our growth is continuing with current and new customers. Do you want to be a part of a Fabricating Team that is preforming challenging, purposeful work? Our team lives by our Core Values: Work Hard, Do What You Say You'll Do, Take Care of Each Other, Quietly Lead, Invest, and Run To It. Ask us about these Core Values to find out if this will be the place you are looking for. The Goals and Challenges of this Role: Review and approval of drawings and models created by other members of the engineering team. Develop tooling, fixtures, drawings and procedures working with internal resources as well as external vendors. Develop and improve manufacturing utilizing knowledge of manufacturing equipment, assembly techniques and quality control. Assure product and process quality through testing methods, establishing and revising standards and manufacturing processes. Apply Basic Engineering Principles. Develop complete and accurate documentation of existing as well as new manufacturing processes and product introduction. Work with Project Managers to implement manufacturing drawings, instructions and timelines. Create 3D Engineering Models of Components and Assemblies Create 2D Technical Drawings for Fabrication What You Should Bring to this Role: 3-5 years manufacturing, quality or process improvement experience BS degree in areas related to manufacturing, industrial engineering, engineering technology or relevant experience Demonstrated ability to lead and drive change through the organization. Proficiency with Autodesk AutoCAD and Inventor, MS Office tools, and CMM inspection software and equipment. Inventor (or SolidWorks) and AutoCAD proficient Understanding of ASME/ASTM Drawing Standards GD&T experience is a plus Experience with Inventor Sheet Metal Tools is a plus 2024-04-21T03:01:42Z | |
| Manufacturing Associate Abeona Newburgh Heights Abeona is looking for a Manufacturing Associate to join our team in Cleveland, OH. The successful candidate will be responsible for Manufacturing initiatives supporting multiple product pipelines. The candidate will be an integral part of a fast-paced group responsible for the manufacture of retroviral vector, autologous gene-corrected cell therapies, and clinical AAV gene therapies. Responsibilities will include executing protocols and manufacturing clinical material across multiple products as well as supporting process optimization work and document generation. The ideal candidate will have experience in production of biologics in a controlled cGXP setting. Strong aseptic and cell culture technique as well as collaborative work in a team is an integral part of this position. Essential Duties and Responsibilities: - Produce cell therapies in cGMP facility in conjunction with manufacturing production records (MPRs). - Execute studies in support of process optimization and validation. - Author, review, and provide technical support for manufacturing SOPs and MPRs. - Identify, suggest, and manage projects in parallel with manufacturing activities to reach set goals. - Ability to collaborate with others while maintaining a strong capability in independent, critical thought. - Strong organizational skills required. - Must be able to work as part of a team. - Contribute to activities that support safety and/or lab infrastructure. Qualifications: - BS or equivalent in scientific discipline and min of 2-4 years related lab experience or MS or equivalent with 1-2 years of experience. - General biological lab experience. - Experience with mammalian and/or insect cell culture technology. - Experience with production processes for cell therapies and/or viral vectors or vaccines is highly preferred. - A strong background in the fundamentals and scale-up of production of biologic molecules strongly preferred. - Familiarity with aseptic technique, cell culture, and cell counters is strongly preferred. - GXP experience. Other Skills and Abilities: - Advanced communication and organizational skills. - Advanced interpersonal skills and the ability to work with individuals across all organizational levels. - Attention to detail and accuracy. - Detailed record keeping and data documentation. - Demonstrated project management skills. - Ability to read, analyze, and interpret technical procedures, publications, intellectual property and/or government documents. - Working knowledge of GLP, GDP, GCP and GMP regulations and their ISO counterparts and ICH Guidelines. - High level of proficiency with Microsoft Office programs. - Less than 10% travel. Any travel will be reimbursed in accordance with company policy Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to experience prolonged sitting, some bending, stooping and stretching. Hand-eye coordination and manual dexterity sufficient to operate office equipment is required. A normal range of hearing and vision correctable to 20/20 is required. Occasional lifting of up to 50 pounds is required. Powered by JazzHR 2023-12-17T14:31:12Z | |
| Manufacturing Engineer Actalent Newburgh Heights Actalent is hiring for a Manufacturing Engineer - Lead the implementation into manufacturing of all new, changed, or improved products (via Process Sign-Off) including documentation and final reports - Develop, evaluate, improve, and document manufacturing processes - Work closely with quality and manufacturing personnel to implement measurement and process control techniques and procedures - Design and develop tooling and processes to ensure effective and efficient production methods - Develop sources for and collaborate with vendors to develop specifications for tooling, equipment, parts, or materials, and evaluating products - Assist operations on estimating staffing requirements, production times, and relative costs to provide data for operational decisions - Work closely with manufacturing department to develop, coordinate, and implement technical and process training for employees - Design and develop a structured process for improvement and coordinate product/process changes (ECR / PCR process) Skills & Qualifications: - 5 years plus- Bachelor's degree in Mechanical / Industrial Engineering If no degree, 10 years of manufacturing engineering experience - Experience with tooling or machining or fabricating processes - Experience using Solidworks , Creo, or Pro-E - Ability to read technical drawings / blueprints Nice to haves: - Prior experience with compression/transfer molding and industrial paint - Prior experience with CNC programming (HAAS, Mazak) - Prior experience with robotics (FANUC, UR, Doosan) - Experience with a statistical software package such as SQC Pack or Mini Tab About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: - Hiring diverse talent - Maintaining an inclusive environment through persistent self-reflection - Building a culture of care, engagement, and recognition with clear outcomes - Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodationactalentservices.com (%20actalentaccommodationactalentservices.com) for other accommodation options. 2024-04-12T15:05:25Z |
| Previous | Page 2 of 359 | Next |
